Our Strongest Yet
A great solution for everyday bark control.
Neighbour's dog have a little too much to say? Or maybe someone complained about your dog barking while you're at work. The Dog Silencer has you covered! Easily quiet any dog up to 60.1 m away – that's 4× stronger than the competition.
High Sound Distance
The Dog Silencer's ultrasonic sound waves can reach dogs up to 60.1 m away.
Automatic Bark Detection
Detect dog barking up to 22.9 m away
Rain and sprinklers are no problem for the Dog Silencer. It has a water resistance rating of IPX4.
Remote Control Option
If a dog is barking outside of the device's 22.9-metre detection range, you can activate it manually with the press of a button. The remote control can be used from inside your home, car, or even in your pocket.
Where to Use It
How It Works
Details and Specs
|Bark Detection||Up to 22.9 m|
|Stops Barking||Up to 61 m|
|Remote Control||Up to 22.9 m|
|Dimensions||13.3 cm H × 10.8 cm W × 4.6 cm D|
6 “AA” Batteries
|Manual||PDF [572 KB]|
|Warranty||1-Year manufacturer's warranty|
60-Day Money-Back Guarantee
Mounting Bracket (optional accessory)
- Dog Silencer®
- Remote control
- 1.5-Metre AC Adapter
What is ultrasonic sound?
Ultrasonic sound is above the hearing range of humans, but is attention grabbing and irritating to dogs. This makes a safe and effective tool for dog training. It takes your dog's focus off of barking and towards the high-pitched sound.
Related Post: The Science of Sound Waves
What is Audio mode?
When using “Audio” mode, you will hear the Dog Silencer activate. It's recommended you use this mode when adjusting the bark sensitivity when first setting up the unit. In addition, you can use the audio mode for older dogs or dogs with poor hearing as an alternative to the ultrasonic sound training.
Is the “High / Low” dial for volume?
The high-low dial on the side of the unit adjusts the microphone sensitivity. This is not a volume setting. You may adjust the sensitivity of the bark sensor between “High” (if the dog is far away) and “Low” (if the dog is near the unit, or if the unit is being used indoors).
We recommend you start with the unit on low and then increase the sensitivity as needed. There is no volume change necessary on the Dog Silencer, as the ultrasonic frequencies can travel up to 200′ (61 m) in a clear, unobstructed path.
Will this bother my other pets?
Cats and dogs have very similar hearing ranges, so if your cat is near the unit when it's activated, yes, it will probably bother the cat. But, the sound from the Dog Silencer does not go through walls or around corners. For example, if the Dog Silencer is located in the back yard, and your cat is in the front yard or even in the house, the sound should not bother him at all. If the Dog Silencer is being used indoors, you'll want to keep cats and / or rodent pets out of the area where that is being used.
Will this work for whining or howling?
If the Dog Silencer is close to the dog, you may be able to adjust the microphone sensitivity higher to pick up howling or even whining. If this doesn't work, you might consider our BarkWise™ no-shock training collar for your dog.
Also keep in mind that a dog might be howling or whining for reasons such as discomfort, fear, or anxiety. These issues should be discussed with a veterinarian instead of “punished” with any bark control system.
Can I use the Dog Silencer with a puppy?
We do not recommend using the Dog Silencer on puppies under 1-year of age. Please consult your veterinarian.
Will this work through fences, walls, windows, or bushes?
No. The high-pitched sounds emitted by our training devices cannot penetrate any solid objects such as wood fences, windows, walls or thick shrubbery.
However — sparse trees, window screens, chain link and wrought-iron fences should be okay.
Related Post: What will ultrasonic sound go through?
Can the Dog Silencer be used with an invisible fence?
We recommend you do not use any ultrasonic bark control devices in combination with invisible fence systems. This is because the sound frequencies emitted by our bark control devices are very similar to those emitted by the invisible fence collar. This may cause confusion and interfere with the dog's training.
Related Post: Ultrasonic Bark Control and Electric Fences Don’t Mix
How does the remote control work?
Your purchase includes a keychain-size remote control which can be used to activate the device manually. The remote can be used up to 75 feet (23m) away from the main unit, and is convenient for on-demand training.
Should I use batteries or electricity? How long does the battery last?
You can use batteries or electricity — it's your choice. But for best results we do recommend using the included AC adapter, especially in the early stages of training when the dog will be barking more. Battery life will vary depending on the weather, the quality of the batteries used, as well as how often the unit is being activated.
If you need to use batteries, rechargeables are a great option to save money. We also offer a new Solar Panel add-on!
Note: Please do not use aftermarket AC adapters ( those not purchased from Good Life® ) as this will void your product warranty.
Will it hurt or harm the dog in any way?
No it will not. All Good Life products are designed to be safe and humane, and they are only designed to stop excess or nuisance barking. The high-pitched training sounds are not painful or harmful, and if a dog really needs to bark, he can. They will not stop a dog from barking out of instinct (at an intruder for example).
Although not harmful, the sounds emitted by our products may be too intense for puppies under one year of age as they are still developing their hearing. Please consult your veterinarian before using this product with puppies.
How long before I should expect results?
While many customers see the effects within a few days, this unit is a training device and will depend on how quickly the dog associates the sound with his barking. Some customers also report the dog barking at the unit, or barking more than usual in the first few days.
This is a normal part of the learning process. We strongly recommend you give the device two to three weeks to see full results.
Does it have to be on all the time?
For best results, the unit needs to be on and in use near the dog at all times (it will go into standby mode when the dog is not barking). For best results, the unit needs to be left on so that it can activate consistently each time the dog barks.
What is the range/angle/coverage area?
The ultrasonic sounds will emit in a cone shape of about 130°, or about 65° on each side. The sound is directional, and will have the best training results if the device is pointed directly at the dog(s) you wish to train.
2-Year Protection Plan
3-Year Protection Plan + Accident Coverage
Save precious time and money with our newest upgrade to the Dog Silencer® or Dog Silencer® MAX.
This high-efficiency solar panel allows you to power your favorite bark control device 24/7 without the use of expensive batteries or cumbersome wires. It's especially great for using your Dog Silencer in high-up or hard-to-reach areas like tall trees or second-story windows. Just set it and forget it!Today's Price Usual Price
$69.95 USDView Product
Mounting Bracket with Pan & Tilt
Perfect for mounting your Dog Silencer® or Dog Silencer® MAX on fences, decks, trees, walls, posts, and much more. The angle of tilt is 70°.Product Price $14.95 USDView Product
Amplifies your Dog Silencer® or Dog Silencer® MAX's sound output by 4–6 dB. Easy to snap on and off.
Cannot be used at the same time as another faceplate.Product Price $19.95 USDView Product